{ "currentVersion": 10.91, "cimVersion": "2.9.0", "serviceDescription": "

Date of Images:<\/SPAN><\/P>

9/7/2020, 9/8/2020, 9/13/2020, 9/14/2020, 9/20/2020<\/SPAN><\/P>

Date of Next Image:<\/SPAN><\/P>

None Expected<\/SPAN><\/P>

Summary:<\/SPAN><\/P>

The Advanced Rapid Imaging and Analysis (ARIA) team at NASA's Jet Propulsion Laboratory (JPL) and California Institute of Technology (Caltech) in Pasadena, California, created this Damage Proxy Maps (DPMs) depicting areas in the Angeles National Forest in Southern California that are likely damaged (shown by red and yellow pixels) as a result of the Bobcat fire. The map was derived from synthetic aperture radar (SAR) images from the Copernicus Sentinel-1 satellites, operated by the European Space Agency (ESA), acquired before (September 1 and 2, 2020) and during the fire (September 7th 7PM, September 8th 7AM, September 13th 7PM, and September 14th 7AM, September 20th 7am local time). <\/SPAN><\/P>

The color variation from yellow to red indicates increasingly more significant change. Preliminary validation was done by comparing to independent observations by NASA's VIIRS and MODIS sensors available at the Fire Information for Resource Management System (FIRMS) and fire perimeter information available at the National Interagency Fire Center (NIFC). This damage proxy map should be used as guidance to identify burned areas. <\/SPAN><\/P>

Before - After Image Pairings<\/SPAN><\/P>

DPM Date: Before image used<\/SPAN><\/P>

9/7 DPM: 9/1/2020<\/SPAN><\/P>

9/8 DPM: 9/2/2020<\/SPAN><\/P>

9/13 DPM: 9/7/2020<\/SPAN><\/P>

9/14 DPM: 9/8/2020<\/SPAN><\/P>

9/20 DPM: 9/14/2020<\/SPAN><\/P>

Suggested Use:<\/SPAN><\/P>

This damage proxy map shows surface change with yellow to red indicating more significant change or building damage due to the explosion. The map may be less reliable over vegetated areas. The lack of colored pixels over vegetated areas does not necessarily mean no damage. Small scale change or partial structural damage may not be detected by this map.<\/SPAN><\/P>

Satellite/Sensor:<\/SPAN><\/P>

Copernicus Sentinel-1 Synthetic Aperture Radar (SAR)<\/SPAN><\/P>

Resolution:<\/SPAN><\/P>

30 meters<\/SPAN><\/P>

Credits:<\/SPAN><\/P>

Sentinel-1 data were accessed through the Copernicus Open Access Hub and the NASA mirror managed by Alaska Satellite Facility (ASF). The image contains modified Copernicus Sentinel data (2020), processed by ESA and analyzed by the NASA-JPL/Caltech ARIA team. This research was carried out at JPL funded by NASA Earth Applied Sciences Disasters Program.<\/SPAN><\/P>

Data Download:<\/SPAN><\/P>

https://aria-share.jpl.nasa.gov/202009-Bobcat_Fire/<\/SPAN><\/A><\/P>

Esri REST Endpoint:<\/SPAN><\/P>

See URL section on right side of page<\/SPAN><\/P>

WMS Endpoint:<\/SPAN><\/P>

<\/P><\/DIV><\/DIV><\/DIV>", "mapName": "aria_dpm_sentinel1_bobcatfire", "description": "", "copyrightText": "NASA-JPL/Caltech ARIA Team, ESA, Copernicus", "supportsDynamicLayers": true, "layers": [ { "id": 0, "name": "ARIA Damage Proxy Map (Sentinel-1) 9/7/2020 at 7pm PDT", "parentLayerId": -1, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Raster Layer", "supportsDynamicLegends": true }, { "id": 1, "name": "ARIA Damage Proxy Map (Sentinel-1) 9/8/2020 at 7am PDT", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Raster Layer", "supportsDynamicLegends": true }, { "id": 2, "name": "ARIA Damage Proxy Map (Sentinel-1) 9/13/2020 at 7pm PDT", "parentLayerId": -1, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Raster Layer", "supportsDynamicLegends": true }, { "id": 3, "name": "ARIA Damage Proxy Map (Sentinel-1) 9/14/2020 at 7am PDT", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Raster Layer", "supportsDynamicLegends": true }, { "id": 4, "name": "ARIA Damage Proxy Map (Sentinel-1) 9/20/2020 at 7am PDT", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Raster Layer", "supportsDynamicLegends": true } ], "tables": [], "spatialReference": { "wkid": 4326, "latestWkid": 4326, "xyTolerance": 8.983152841195215E-9, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -400, "falseY": -400, "xyUnits": 9.999999999999999E8, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 }, "singleFusedMapCache": false, "initialExtent": { "xmin": -118.1004458864598, "ymin": 34.15140364640947, "xmax": -117.7959915571158, "ymax": 34.37670641871798, "spatialReference": { "wkid": 4326, "latestWkid": 4326, "xyTolerance": 8.983152841195215E-9, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -400, "falseY": -400, "xyUnits": 9.999999999999999E8, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 } }, "fullExtent": { "xmin": -118.301617623, "ymin": 33.89271540502484, "xmax": -117.216895401, "ymax": 34.556326516, "spatialReference": { "wkid": 4326, "latestWkid": 4326, "xyTolerance": 8.983152841195215E-9, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -400, "falseY": -400, "xyUnits": 9.999999999999999E8, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 } }, "datesInUnknownTimezone": false, "minScale": 0, "maxScale": 0, "units": "esriDecimalDegrees", "supportedImageFormatTypes": "PNG32,PNG24,PNG,JPG,DIB,TIFF,EMF,PS,PDF,GIF,SVG,SVGZ,BMP", "documentInfo": { "Title": "Map", "Author": "", "Comments": "

Date of Images:<\/SPAN><\/P>

9/7/2020, 9/8/2020, 9/13/2020, 9/14/2020, 9/20/2020<\/SPAN><\/P>

Date of Next Image:<\/SPAN><\/P>

None Expected<\/SPAN><\/P>

Summary:<\/SPAN><\/P>

The Advanced Rapid Imaging and Analysis (ARIA) team at NASA's Jet Propulsion Laboratory (JPL) and California Institute of Technology (Caltech) in Pasadena, California, created this Damage Proxy Maps (DPMs) depicting areas in the Angeles National Forest in Southern California that are likely damaged (shown by red and yellow pixels) as a result of the Bobcat fire. The map was derived from synthetic aperture radar (SAR) images from the Copernicus Sentinel-1 satellites, operated by the European Space Agency (ESA), acquired before (September 1 and 2, 2020) and during the fire (September 7th 7PM, September 8th 7AM, September 13th 7PM, and September 14th 7AM, September 20th 7am local time). <\/SPAN><\/P>

The color variation from yellow to red indicates increasingly more significant change. Preliminary validation was done by comparing to independent observations by NASA's VIIRS and MODIS sensors available at the Fire Information for Resource Management System (FIRMS) and fire perimeter information available at the National Interagency Fire Center (NIFC). This damage proxy map should be used as guidance to identify burned areas. <\/SPAN><\/P>

Before - After Image Pairings<\/SPAN><\/P>

DPM Date: Before image used<\/SPAN><\/P>

9/7 DPM: 9/1/2020<\/SPAN><\/P>

9/8 DPM: 9/2/2020<\/SPAN><\/P>

9/13 DPM: 9/7/2020<\/SPAN><\/P>

9/14 DPM: 9/8/2020<\/SPAN><\/P>

9/20 DPM: 9/14/2020<\/SPAN><\/P>

Suggested Use:<\/SPAN><\/P>

This damage proxy map shows surface change with yellow to red indicating more significant change or building damage due to the explosion. The map may be less reliable over vegetated areas. The lack of colored pixels over vegetated areas does not necessarily mean no damage. Small scale change or partial structural damage may not be detected by this map.<\/SPAN><\/P>

Satellite/Sensor:<\/SPAN><\/P>

Copernicus Sentinel-1 Synthetic Aperture Radar (SAR)<\/SPAN><\/P>

Resolution:<\/SPAN><\/P>

30 meters<\/SPAN><\/P>

Credits:<\/SPAN><\/P>

Sentinel-1 data were accessed through the Copernicus Open Access Hub and the NASA mirror managed by Alaska Satellite Facility (ASF). The image contains modified Copernicus Sentinel data (2020), processed by ESA and analyzed by the NASA-JPL/Caltech ARIA team. This research was carried out at JPL funded by NASA Earth Applied Sciences Disasters Program.<\/SPAN><\/P>

Data Download:<\/SPAN><\/P>

https://aria-share.jpl.nasa.gov/202009-Bobcat_Fire/<\/SPAN><\/A><\/P>

Esri REST Endpoint:<\/SPAN><\/P>

See URL section on right side of page<\/SPAN><\/P>

WMS Endpoint:<\/SPAN><\/P>

<\/P><\/DIV><\/DIV><\/DIV>", "Subject": "ARIA Damage Proxy Map (Copernicus Sentinel-1) for the Bobcat Fire in California 2020", "Category": "", "AntialiasingMode": "None", "TextAntialiasingMode": "Force", "Version": "2.4.0", "Keywords": "NASA,NASA Disasters Program,ARIA,Fire,Wildfire,Bobcat Fire,California,Copernicus,Sentinel-1,ESA,SAR,Burn Scar" }, "supportsQueryDomains": true, "capabilities": "Map,Query,Data", "supportedQueryFormats": "JSON, geoJSON, PBF", "exportTilesAllowed": false, "referenceScale": 0.0, "supportsDatumTransformation": true, "archivingInfo": {"supportsHistoricMoment": false}, "supportsClipping": true, "supportsSpatialFilter": true, "supportsTimeRelation": true, "supportsQueryDataElements": true, "maxRecordCount": 2000, "maxImageHeight": 4096, "maxImageWidth": 4096, "supportedExtensions": "WMSServer", "resampling": false, "serviceItemId": "56fda41f8b0e491d9ca350f10976c3b8" }